Step 1: Overview
- Day-to-Day Timeline
- SATURDAY: Add the new outlet and power supply (Steps 1-8).
- SUNDAY: Run wiring for the lights (Steps 9-14).
See more: https://baskadia.com/post/73raa
Step 2: Feed Up the Fish Tape
To power the lights, start by installing a remodeling wiring box above an upper cabinet and connect it to the dedicated circuit powering the microwave. Flip off the breaker to the existing outlet, then remove the outlet and create an opening in the box. Prepare the fish tape, feed it up through the knockout, and out of the new hole in the drywall.
Step 3: Pull Down the Wire
Strip the insulation off the length of 12/2 wire and connect it to the fish tape. Pull the fish tape through the knockout until about 10 inches of wire is exposed, then cut the first 6 inches of wire for pigtails. Strip the individual wires from the yellow sheathing and join them with a wire nut. Repeat this process for the black and ground wires, then rewire the existing outlet and secure the wiring into the box.
Step 4: Add Dimmer
Cut the 12/2 wire and thread it through a remodeling box at the opening for the outlet. Install the box in the wall, strip the wires, and attach them to the new outlet. Connect the power supply's red and black wires to the inputs on the wireless dimmer and tighten the setscrew.
See more: https://www.addonface.com/read-blog/55541
Step 5: Plug in the Power Supply
Place the power supply and the dimmer on top of the upper cabinets and plug the power supply into the new outlet. Cut a length of 18/2 solid-core wiring, then drape the wiring along the cabinets.
Step 6: Wire Up the Terminal
Cut the red and black wires to reach the center underneath the corner cabinet. Connect the wires to the terminal and tighten the setscrew. From here, you'll add wiring to branch in two directions to cover both walls of the L-shaped kitchen.
Step 7: Cut the Tape
Measure the length of tape needed to cover the cabinets along one wall and cut the LED tape across the center of the copper contacts. Repeat this process for the other wall of cabinets.
Step 8: Wire Up the LEDs
Use LED tape-light extension connections to turn the terminal into a splitter, sending power to both walls. Peel away the adhesive backing under the copper contacts, slide the tape into the connector, and snap the lock closed. Repeat this process for the LED tape running under the other wall of cabinets. Connect the positive and negative ends of the extensions to the terminal.
See more: https://wiuwi.com/blogs/112794/What-Are-the-3-Types-of-Lighting
Step 9: Tweak the Beam
Restore the power and adjust the position of the LED tape to ensure even coverage across the backsplash and countertop. Keep the strip 1 to 2 inches back from the face frame to distribute the light evenly. If you have a dark countertop, install the tape against the back of the face frames to eliminate bright spots.
Step 10: Create Passageways
Drill holes through the sides of neighboring cabinets to allow the LED tape to travel underneath. If needed, slice through cabinet sides to install the LEDs against the face frame.
Step 11: Get Inside a Cabinet
Drill holes underneath the cabinets for the wiring to pass through. In kitchens with cabinets of varying heights, run the wiring inside the adjacent taller cabinet. Clamp plywood scrap to the inside of the cabinet and drill holes to route the wiring.
Step 12: Press the Tape in Place
Clean the undersides of the cabinets with denatured alcohol, then peel the backing off the LED tape and press it in place under the straight run of cabinets.
Step 13: Wire Inside the Cabinet
Align the polarity of the tape and an extension, then clamp down the connection. Fish the wires through the hole in the taller cabinet and twist together the positive and negative wires. Tuck the wires into the corner of the cabinet's face frame.
Step 14: Add the Switch
Stick the LEDs to the underside of the cabinet above the sink, then install the wireless touch pad's bracket and connect the switch. Finally, plug the power back in, and your touch pad should pair with the wireless dimmer. Attach the terminal to the underside of the cabinet.
Frequently Asked Questions
1. How long does LED tape lighting last?
LED tape lighting is designed to be long-lasting, with an average lifespan of about 50,000 hours. This means that even if you use your undercabinet LED lights for 8 hours a day, they should last for over 17 years.
2. Can I install undercabinet LED lighting myself, or should I hire a professional?
Installing undercabinet LED lighting can be a DIY project if you have basic electrical knowledge and feel comfortable working with wiring. However, if you are uncertain or uncomfortable with electrical work, it is always recommended to hire a professional electrician to ensure proper installation and safety.
3. Can I dim LED tape lighting?
Yes, LED tape lighting can be dimmed. In fact, many LED tape lighting kits come with a wireless dimmer switch that allows you to adjust the brightness according to your preference. This feature allows you to create the perfect ambiance in your kitchen.
4. What are the benefits of undercabinet LED lighting?
Undercabinet LED lighting offers several benefits, including enhanced visibility and task lighting for your countertop, backsplash, and workspace. LED lights are energy-efficient, long-lasting, and provide a more focused and consistent light output compared to traditional lighting options. Additionally, LED lighting creates a modern and stylish look in any kitchen.
5. Can undercabinet LED lighting be installed in any kitchen configuration?
Yes, undercabinet LED lighting is highly versatile and can be installed in various kitchen configurations, including L-shaped layouts and kitchens with wall cabinets of different heights. The LED tape can be easily customized and cut to fit any desired length, allowing you to adapt it to your specific kitchen layout.
By following these simple steps, you can easily install undercabinet LED lighting and transform your kitchen into a well-lit and visually appealing space. Enjoy the warm and inviting atmosphere that LED lighting provides while showcasing your countertop and backsplash in all their glory.
Follow for more: https://biztime.com.vn/bestledlightstripsblls
